CL6 White Energy Multi

13 970,00 CAD

CL6 White Energy Multi has a nominal capacity of 6 liters per hour (1.6 GPH). The module includes elements for fine purification of inlet water, including double-pass reverse osmosis membrane and an ultrafilter. It also incorporates full-volume UV sterilization to ensure water purity. Purified water is pumped into a hoseline with a pressure range of 500 to 1,200 psi.

CL6 White Energy Multi features a 4.3″ LCD display that allows the customer to:

control humidity level in max. 6 independent zones,
adjust the working pressure in the hoseline,
remove the request for humidification,
monitor the maintenance interval.
check the quality of water purification using the built-in TDS-meter, which measures Total Dissolved Solids.

Attention! The nozzle capacity with CL6 WE Multi is reduced: PNS to 0.8 l/h, PNM to 1.0 l/h.

The central module operation algorithm includes regular service washings. This is done to prevent water stagnation in the high-pressure hoseline, ensuring the system functions effectively.

Features
Technical data

unique SPoU design (Service at Place of Use)
quiet operation
unique fine purification system – mineralization rate > 99.5%
full-volume UV sterilization – destroys up to 99.99% of bacteria
up to 6 independent zones
leakage control in the route and in the module
convenient installation

dimensions, W x H x D, in: 23.6 x 13.8 x 7.9

weight, lbs: 48.5

capacity, GPH: 1.6 (6 LPH)

number of individual zones: 6

material: plastic

reverse osmosis: 1 double-pass membrane

UV sterilization: full-volume

display, inches: 4.3

inlet pressure, psi: 30...90

working pressure, psi: 500...1,200

voltage, VDC: 24

power consumption, W: 280

LP connections: inlet 3/4", outlet 3/4"

HP connections: 2 x CEL 12x1.5

Water is supplied automatically from the water supply.

First of all, water passes through the ultracarbon filter (sediment, carbon and internal ultrafiltration in one), which allows to purify water from mechanical impurities, organic compounds and chlorine.

The heart of the system. Here water is finely purified by a double reverse osmosis and disinfected in full-volume UV sterilization tank. Then purified water is being injected under high pressure by a silent pump into the high-pressure hoseline. In addition, the central module has a controller that coordinates the operation of the nozzles and control units.

The high-pressure hoseline is designed as a loop. It consists of a double-layer hose (inner layer material made of PTFE, outer layer is a stainless steel braiding), high-pressure fittings and tees. The operational pressure in the system ranges between 35 – 82 bar, while the burst pressure of the hose is 900 bar, in other words, it has a 15 times safety margin. The material of the inner layer is not accidentally chosen, PTFE has exceptional low adhesion and is not a food for bacteria.

SV noiseless valves are powered by a low-voltage cable. Each cable from its own valve is led to the controller installed inside the central module. The nozzle heads are being installed directly into the room through ventilation grilles, walls or ceiling and atomize a fog into the room. Microdroplets instantly dissolve into the air, increasing RH level. The miniature nozzle heads do not spoil the interior design.

The transmitter is usually installed on the ceiling or on the wall. It measures humidity in a real-time mode and transmits it to the central module. HT1 requires a low-current power cable.

Filtration

Ultracarbon filter BB 10″

UCF10

330,00 CAD

The ultracarbon filter comes with the composite cartridge with three filtration stages: sediment, carbon and ultrafiltration.

Dimensions, W x H x D, in: 7.9 x 18.5 x 6.7

Filtration: sediment / carbon / ultra

Connections: inlet 3/8", outlet 3/8"

Control units

Transmitter HT1

HT1

210,00 CAD

HT1 monitor RH level in the humidification zone and send a signal to switch on/off humidification in the room. HT1 is installed in each humidification zone and require a low-voltage cable.

Dimensions (Ø х D), in: 11 x 0.3

Material: plastic

Color: white

Voltage, VDC: 24

Wireless control unit HS5, white

HS5-W

760,00 CAD

With wireless HS5 unit user can set the desired level of humidity in the certain room, set automatic mode, or disable the operation of the current humidification zone.

Dimensions, W x H x D, in: 3.2 x 2.8 x 0.7

Material: plastic

Color: white

RH control range, %: 5…55

Wireless range: up to 3000 ft

Frequency range, MHz: 315

Sensor accuracy, %: ± 2

Voltage, VDC: 24

Screen, inches: 3", monochrome

Mount: magnetic

Wireless control unit HS5, black

HS5-B

760,00 CAD

With wireless HS5 unit user can set the desired level of humidity in the certain room, set automatic mode, or disable the operation of the current humidification zone.

Dimensions, W x H x D, in: 3.2 x 2.8 x 0.7

Material: plastic

Color: black

RH control range, %: 5…55

Wireless range: up to 3000 ft

Frequency range, MHz: 315

Sensor accuracy, %: ± 2

Voltage, VDC: 24

Screen, inches: 3", monochrome

Mount: magnetic

Wireless additional control unit MHS5, white

MHS5-W

740,00 CAD

MHS5 is the additional wireless unit, which allows you to control the humidity and switch off the nozzles in the current humidification zone when the maximum RH is reached (default max. level is set at 55%).

Dimensions, W x H x D, in: 3.2 x 2.8 x 0.7

Material: plastic

Color: white

Max RH level, %: 55

Wireless range: up to 3000 ft

Sensor accuracy, %: ± 2

Screen, inches: 3", monochrome

Mount: magnetic

Wireless additional control unit MHS5, black

MHS5-B

740,00 CAD

Dimensions, W x H x D, in: 3.2 x 2.8 x 0.7

Material: plastic

Color: black

Max RH level, %: 55

Wireless range: up to 3000 ft

Sensor accuracy, %: ± 2

Screen, inches: 3", monochrome

Mount: magnetic

Nozzles & parts

85 μm nozzle head with double filter

PNM

250,00 CAD

PNM nozzle with 85 μ orifice is used to create a fine water fog. The artificial ruby insert ensures solid construction and long lifetime.

Dimensions (Ø х OD), in: 0.55 x 0.7

Atomizing orifice diameter, μ: 85

Capacity at 1000 psi pressure, GPH: 0.3

Material: stainless steel

Connection: M8m

Finishing: сhrome

Flexible steel tube for nozzle output, 15 cm

DKOL-M8 Ext 15

130,00 CAD

DKOL-M8 Ext 15 is 15 cm long flexible extender, which is required for several applications: to extend the nozzle heads or GRM splitter from SV valve, or to extend PNS / PNM from TCCC tee.

Dimensions (Ø х OD), in: 0.43 x 0.67

Connections: DKOL-M8f

Material: stainless steel

Flexible steel tube for nozzle output, 70 cm

DKOL-M8 Ext 70

140,00 CAD

DKOL-M8 Ext 70 is 70 cm long flexible extender, which is required for several applications: to extend the nozzle heads or GRM splitter from SV valve, or to extend PNS / PNM from TCCC tee.

Dimensions (Ø х OD), in: 0.43 x 2.83

Connections: DKOL-M8f

Material: stainless steel

Flexible steel tube for nozzle output, 140 cm

DKOL-M8 Ext 140

160,00 CAD

DKOL-M8 Ext 140 is 140 cm long flexible extender, which is required for several applications: to extend the nozzle heads or GRM splitter from SV valve, or to extend PNS / PNM from TCCC tee.

Dimensions (Ø х OD), in: 0.43 x 5.6

Connections: DKOL-M8f

Material: stainless steel

Active SV valve

700,00 CAD

SV – absolutely silent valve opens / closes upon request of the controller installed in the central module. The valve is connected to the central module by a cable.

Dimensions (Ø х OD), in: 1.6 x 2.9

Connections: 2 x CEL

Material: stainless steel

Voltage, VDC: 24

High pressure hose line & parts

High pressure hose, 5/32”

HPH2

26,20 CAD

HPH2 composite high-pressure hose consists of two layers: the inner layer is made of Teflon (PTFE), the outer layer is made of AISI 304 stainless steel. Teflon, also called PTFE provides a high level of hygiene as it is chemically inert and does not serve as a food for bacteria.

Outer diameter, in: 5/32

Max. working pressure, psi: 4,700

Burst pressure, psi: 13,800

Min. bending radius, in: 1.25

Inner layer material: PTFE

Outer layer material: stainless steel AISI 304

CEL-CEL-CEL Tee

TCCC

62,60 CAD

TCCC tee with CEL-CEL-CEL connections allows to make branches from the high-pressure hose line for installation of nozzles.

Dimensions, W x H x D, in: 40,5 x 28 x 13,5

Material: stainless steel

Connections: CEL-CEL-CEL

CEL-CEL-DKOL Tee

TCCD

62,60 CAD

TCCD tee with CEL-CEL-DKOL connections is used for direct installation of SV active valve on the tee.

Dimensions, W x H x D, in: 42 x 31 x 19,5

Material: stainless steel

Connections: CEL-CEL-DKOL

DKOL fitting for HPH2

FITD2

40,70 CAD

FITD2 fitting is used to connect HPH2 hoses.

Dimensions (Ø х OD), in: 0.6 x 1.4

Material: stainless steel

Connections: DKOL

Ferrule for HPH2

FER2

14,30 CAD

Crimping ferrule FER2 is used to fix FITD2 fitting.

Dimensions (Ø х OD), in: 0.3 x 0.6

Material: stainless steel

FAQ

What is adiabatic humidification?

Adiabatic humidification involves adding humidity to the air in liquid form and then converting it to a gaseous state. This requires energy, which is extracted from the surrounding air. This process also results in the temperature decrease and is therefore known as adiabatic cooling.

What are the main advantages of Liechty systems?

Here are the main advantages of our systems:

unique purification formula (preliminary filtration + double RO);
full-volume UV sterilization with circulation & re-sterilization;
noiseless operation;
SPoU (service at place of use);
adiabatic cooling & dust suppression.

How does your system operate?

Firstly, the inlet water is purified by our unique multi-stage purification system. Next, it is pressurized by a quiet high-pressure pump into the hoseline. Finally, it is atomized by miniature nozzles directly into the premises, rapidly increasing the RH level and providing freshness.

The system is controlled by control units, which can be either wired or wireless, and features built-in humidity sensors with high accuracy.